FAQ About AERTI's micro hyperbaric oxygen chamber & chamber filling concentrator (1)
FAQ About AERTI's micro hyperbaric oxygen chamber and chamber filling concentrator (1)
For AERTI's micro hyperbaric oxygen chamber and chamber filling concentrator, some new customers are unfamiliar with our products and often have questions. Here we have compiled some frequently asked questions and their answers for your reference.
Q1: I want to know more about safety.
We fully understand your concerns about safety.
Safety is always the top priority we take into consideration while designing the product, to ensure the safety:
(1)The micro hyperbaric oxygen chamber is made of aviation grade TPU with high strength and resilience, flame retardant and harmless, can stand frequent folding(Inflate and deflate)，both physically&chemically safe.
Compliance documents of ROHS, SGS, BLAST TEST REPORT and FLAME RETARDANT REPORT can be provided.
(2)Both AUTOMATIC and MANUAL pressure relief valve are equipped, users can release the pressure whenever they want by manual valve from both internally and externally.
(3)Double side zipper design, can be opened both internally and externally.
(4)Remote controller is optional, users can stop the filling machine in the chamber.
(5)5 transparent windows will give enough lighting and facilitate interactions between outside and inside.
Q2: What are the merits of OZONE disinfection and how to use it?
(1) Thorough sterilization and disinfection by destroying the DNA structure of bacteria or virus.
(2) Ozone will react chemically with harmful substances or bacteria and degrade into harmless water or carbon dioxide, leaving no residue.
(3) When the chamber is unoccupied, close the zipper and press “OZONE” , it will start 5-minutes disinfection to the chamber, after which, open the chamber and ventilate for 30 minutes.
Q3: How soon will the pressure inside the micro hyperbaric oxygen chamber reach 1.5 ATA? How to fasten the process?
Normally, the time to reach max. Pressure varies within 5-10 minutes according to the flow rate of the filling machine.
To fasten the process, users may switch from AUTOMATICAL mode to MANUAL mode, press “AIR” button to fasten the filling of the chamber, when it reaches max. pressure, press “O2” button or “EOA” button to increase oxygen density inside the chamber.
Q4: When will the automatic relief valve release the pressure? Will the users be able to set up the pressure point by themselves?
When the pressure in the chamber reaches the max. point, i.e.
1.3 ATA: 130KPa
1.5 ATA: 150KPa
2.0 ATA: 200KPa
The pressure point can not be set up or adjusted by the users
#micro hyperbaric oxygen chamber